For accurate and manual error free determination of flash points of fuels, lubricating oils, and homogenous liquids as per ASTMD92, method A & B. Test parameters are set via keypad,with digital display of set and process temperature
Standard Features
- Automatic Flash point detection.
- Automatic Barometric pressure correction.
- Automatic flash point search mode for unknown samples .
- User set-able heating and flashing profile.
- Automatic or user set-able stirrer speed setting and control.
- Automatic heating profile setting depending on initial sample temperature and expected flash point.
- Automatic cutoff at 30°C beyond expected flash point or at max. temperature limit set by the user.
- 2 Preset test Modes as per ASTM Method A & B .
- 16 x 4 Line Back Lit Alpha numeric display .
- In-bulit Key pad for settings & data entry.
- Audio visual indication of end of test and Alarms.
- Over temperature safety cutoff and alarm.
- Last reading stored until report is printed or next test is initiated.
- Serial Printer interface for Automatic printing of test report at a press of a button.
- Ensures minimum power consumption by design thereby reducing operation cost.
- Electrical ignition instead of gas (Optional)
Accessories/ Spares
- 11010-11 Energy Regulator
- 11010-12 Voltage Variac
- 11010-13 Digital Controller
- 11010-14 Reducing Socket cum Flame Regulator
- xxxxx-xx IP-28C Thermometer
- 11010-16 Test Cup
- 11010-17 Temperature Sensor (pt-100)
- 11010-18 Thermometer Holder
- 11010-19 Heating Coil
- 11010-20 Gas Ignition System
- 11010-21 Electrical Ignition System (automatic model only)
- 11010-22 Calibration Certificate