Automatic Penetrometer

'CI' automatic penetrometer, body made of powder coated cr sheet with machined ss top, with inbuilt spirit level. dual speed automatic or manual movement with auto contact detector and automatic release and retention of plunger. full measurement range of 0-620pen in 1⁄10mm scale or1⁄100mm scale

Compliance

ASTM, d5, d217, d937, d1321, d1403, d2884, d4950; ip 49, ip50, ip179, ip310; iso 2137; din 51 579, din 51 580, din 51 804; ftm 791-311, ftm 791-312, ftm 791-313; aocs cc 16-60; aacc 58-14; nf t60-119, nf t60-123, nf t60-132, nf t66-004, bs: 1377

Application

Used for penetration tests on petroleum products and for consistency tests on a wide range of food products, cosmetics, pastes, destempers and other solid to semi-solid products. consists of a dial scale 0-40.0mm with 1⁄10mm sub divisions. (0-400 penetration scale). suits cones and needles to perform all the astm tests on lubricating greases, asphalts, petroleum waxes. compact design facilitates transport for field use. geared dial and plunger movement for accurate placement of the tip of the needle or cone on the surface of the sample.

Models

• 11045-00 standard penetrometer
• 11045-01 standard penetrometer with digital timer.
• 11045-02 fully automatic penetrometer 

Body made of powder coated cr sheet with machined ss top, with inbuilt spirit level. dual speed automatic or manual movement with auto contact detector and automatic release and retention of plunger.

• Automatically timed operator programmable penetration measurements
• Automatic placement of penetrator on sample surface
• Large lcd/touch screen display
• Full measurement range of 0-620pen in 1⁄10mm scale or1⁄100mm scale
• Rechargeable battery or ac operation
• Can be used with any standard cones, needles and other accessories
• Advanced user friendly features to provide ease of operation and highly reproducible consistency measurements.
• User programmable penetration timing 1 to 9999 sec.
• Auto release of penetrator after temperature stabilization can be programmed .
• In-built memory to store 5 test procedures.
• Can be programmed for pass or fail result display.
• Can be connected to a printer for test result printing.
• For non-conductive samples the penetrator can be placed on the sample surface by using coarse and fine push button switches.
• Built in led lamp for greater visibility
• The penetrator assembly automatically returns to its home position after test.

Standard Accessories

• 11045-03 50gm weight
• 11045-04. 100gm weight