Foaming Characteristics Test Apparatus

Application : To determine the Foaming of lubricating oils in applications involving turbulence, high speed gearing or high volume pumping, which can cause inadequate lubrication, cavitation, overflow and premature oxidation.

Instrument Description and Construction

Consists of two constant temperature baths with1000mL test cylinders,(certified) diffusers, air delivery tubes, and flow meters.Supplied with uP based temperature controls, S.S .immersion heaters and circulation stirrers to maintain temperature uniformity. Dual LED displays process and set point temperature values. Test cylinders are held in place by SS weights. 24°C bath has coils for circulating exit air from the 94ºC and a separate coil for circulating cooling water. All controls are enclosed in a sturdy bottom frame made of C.R sheet with elegant powder coated finish.

Standard Accessories/parts

• 11032-00 Base frame with controllers - 1 set
• 11032-01 Glass Test Baths - 2 nos.
• 11032-02 Bakelite Top Lids with circulation coils, Stirrer and heaters - 2 set
• 11032-03 Diffuser stone with tube and Rubber cork - 2 set
• xxxx-xx Air Compressor - 1 nos.
• xxxx-xx Silicone Tube - 2 Meter
• 11032-04 Measuring Cylinders - 2 nos.
• 11032=05 SS Sinker Weights - 2 nos.
• 11032-06 Glass/Acrylic Flowmeters - 2 nos.

Optional Accessories

• 11032-04 Measuring Cylinder 1000ml
• 11032-07 Certified Gas Diffuser
• 11032-06 Glass/Acrylic Flowmeters

• 11032-01 Glass Test Bath
• 11032-08 Spare High temp. bath heater
• 11032-09 Spare low temp. bath heater
• 11032-10 Spare Stirrer Motor
• 11032-11 Spare Moisture Trap
• xxxx-xx Wet gas flow meter
• xxxx-xx Cryostat for low temp. bath coolingxx